
support services
PLUGGING
Pipe plugging is often times required to block or stop flow from entering into a specific pipeline section or retention area for many different reasons. Most commonly to isolate a damaged section of stormwater or sanitary sewer pipe in order to perform required rehabilitation to the damaged areas. Flotech offers plugging services for large diameter storm and sanitary sewer applications.
DEWATERING
De-watering goes hand in hand with pipe plugging. During or after an overflow event and once a pipe or specific area has been isolated with the use of plugging, Flotech utilizes one or multiple jet vac/ Pump truck units to remove water and transfer it to another drainage area to perform the dewatering services.
bypass pumping and Liquid waste management
The purpose of the by-pass/Hauling operation is to pump sewage or stormwater around a maintenance access structure or section of sewer which has collapsed or has a blockage to the extent that the sewage/stormwater will not pass through the line and the possibility of an overflow is eminent.
Temporary traffic control
Flotech Environmental provides essential services and often works in the public Right of Way (ROW). Although our work takes place underground, we are tasked with a major responsibility with public safety requiring planning, permitting and setting up Temporary Traffic Control to access utilities on local, state and Federal roadways. All of our employees are properly trained and certified for the installation and management of Temporary Traffic Control set ups.